Monday 8 February 2016

This weeks pots


Oil pourer
Temnoku with Rutile overglaze. These are with the old iron oxide but I doubled the amount. Very pleased with the result.

These are made with coloured slip,  it has taken several firings to get the percentages right.

The first two are my normal clay painted with cobalt slip,  even though not completely white I'm still pleased,  there is a rustic quality to them. The third one is a porcelain white clay from Scarva,  its painted with the same cobalt but has its own special low expansion glaze.  The cobalt has run a bit so may try it in a cooler part of the kiln.

Some also rans

First successful glaze test firing

Oh it feels so good to have finally overcome a major problem. Having changed to a different supply of red iron oxide I now have control over my glazes again. All of the red glazes I've test have worked and worked well. My long standing black glaze (Temnoku) is actually black and not a yucky dirty green. Up until now I felt a bit of a fraud only able to produce dull and dreary pots.


Saturday 6 February 2016

Linking my pottery blog to facebook

This is a quick test to see if my blog is linked to facebook

Friday 5 February 2016

A beginning

My name is Chris Geall and I am a landscape artist but  I started out many years ago on my artistic career as a potter. For  the last 15 years I have been intending to get back into it but failed each time I've  attempted it. Hopefully  this time will be different.

I'm going to use this blog as a way of documenting and sharing this little adventure.

I started out some eight weeks ago and I've only really just got to the point where I am seriously testing glazes ....it hasn't  been the easiest of starts but I think I'm getting close to where I need to be......hence the reason for the Blog.

This is the the kiln going on tonight and will be opened again on Sunday. At the top of the post you'll see a large number of test tiles, these are mainly testing a new batch of red iron oxide. I've  been all around the houses trying to find out why virtually all my glazes just aren't  doing what they should.

It's been a common thread in my previous attempts to get going again dealing with glaze materials that aren't  what they should be. I have now switched suppliers and hopefully I can start trusting labels again.

So my newly recommended suppliers are : Bath pottery supplies and Scarva pottery supplies.